|
DH-10 Additional Specs.
1. Additional Specifications
2. Built to Industrial Standards From Quality Components
3. Application
4. Other Usage
Additional Specifications:
Humidistat Sensing Element: Long Nylon Ribbon
Starting current or draw: 1.62 AMPS RLA (Running Load Amps).
This in watts is 194.4 watts.
Running Amps: 1.5 Amps.
This in watts is 150 watts Max. This means it will run at around 150 watts
max.
Inverter recommendation: If you need to plug the unit into an
inverter, we recommend buying an inverter of at least 300
watts since the inverter itself will draw some 30 watts or so. If you plan
to connect a laptop, cell phone or medical device to your inverter, you
might want to consider an inverter that uses a pure sine wave. Our
dehumidifier is not as picky and so it will run on either a pure sine wave
or a Modified sine wave inverter. The more watts the inverter is rated for
the more appliances you will be able to connect to it. Therefore the more (i.e watts) the merrier.
Built to Industrial Standards From Quality Parts:
Tecumseh Compressor, Honeywell Humidistat, Morrill Motors Fan/Fan Motor
Compressor
Brand: Tecumseh
Volts: 115V/60HZ/1PH 100V/50HZ/1PH
Refrigerant: 134A
LRA: 10.2
CSA and UR listed
Thermally Protected
Fan/Fan Motor
Brand: Morrill Motors
RPM: 1550
CSA AND UR LISTED
Humidistat: Automatic Switching Control to level you preset
Brand: Honeywell
Scale Range: 20% RH - 80% RH
Sensing Element: Long Nylon ribbon
Operating Temperature Range: 50F to 125F (10C to 52C)
Adjustments: Control Knob for setting %RH levels + On and OFF positions
The numbers on the control knob correspond to the %RH (Relative Humidity)
50%RH recommended for most boat and rv applications
accuracy of these setting ± 5%RH
Accuracy of the %RH settings can be achieved by synchronizing the
unit with a good hygrometer.
Although not needed Additional %RH settings can be achieved with an
accessory called a humidity
controller.
The humidistat will restart the unit
once humidity levels have increased 5%RH
UL listed and CSA listed
Application:
More effective for humidity control than air conditioning (20% to 80%
humidity level selection)
More economical than air conditioning (150 watts at 115 volts AC) especially
in an unoccupied boat or RV
Effective in applications of 1000 sq feet or less (150 cu. Ft. of air per
minute)
Effective in applications where continuous draining is necessary (no bucket
to empty)
Summer Application: Humidity Control in Boats and RVs and other
suited applications during hot and humid conditions with the objective being
to reduce mold and mildew growth.
Off Season Application: Boat and RV Storage during hot and humid conditions with the objective being
to reduce mold and mildew growth.
Mild Weather Application: Humidity Control in Boats and RVs during
mild weather conditions with the objective being to reduce Condensation on
cold surfaces.
Note: the dehumidifier, is not recommend for unattended operation
in below 50°F temperature. Our customers around this time (mild weather) are
on liveaboards and motor homes, where the indoor temperature is set for
personal comfort, so the temperature for them is within allowable usage
limits.
How our customer report using their DH-10s:
Dockside Operation especially in un-occupied boats and RVs.
On a lift out of the water
Live-aboards and Motor Coach owners report using the unit while they are
on-board.
Boat
Owners who are afraid of leaving their central AC units on for extended
periods while they are away from their boats.
Note: the DH-10 dehumidifier, is not recommend for unattended
operation during severe weather conditions.
see more
How our customer report using their DH-10s
Discontinued: Please note that the McIntire Company no
longer produces the DH-10 Dehumidifier. If you would like a dehumidifier similar to the DH-10 we recommend the
Dry Pal manufactured by Mermaid Marine
http://www.mmair.com/marine_division/dehumidifiers/dry_pal_dehumidifier
 Dry
Pal
or the
 CD30
CD30 Manufactured by EbacUSA
http://www.ebacusa.com/cd30.htm
|
